Monday 23 March 2015

How To: Image transfer using Mod Podge Photo Transfer Medium

Hello friends,

Have you all been enjoying the inspiration and games being presented this month for Lulupu's Birthday celebration? We are thoroughly enjoying visiting your blogs to see your linked creations.

My post today is a short tutorial on image transfer. Ever since I bought mod podge image transfer from the Lulupu store a few months back, I've been itching to try it out. The process is very simple:

Gather all your supplies:
1. Prints / photocopies of image : if you have a laser printout or an actual photograph, take a photo copy. The image will only transfer from a thinnish paper - photo paper is too thick. Also, remember that the transferred image will be a mirror image of the original, so if you have text or need a particular orientation, flip the image before printing.
2. Mod podge image transfer medium: comes with a foam brush for easy application.
3. Pattern paper (or canvas/ wood/ metal) onto which you want to transfer the image.
4. Mod podge matte to make the surface waterproof. Gel medium would also work for this.

Step1: Prepare the base on which you want to transfer the image. In my case, two sheets of Prima paper with a thin coat of white gesso. Once dry applied a coat of mod podge matte. This ensures the layers beneath are sealed and the surface is waterproof. (you will discover soon why waterproof surface is required)

Step 2: Cut out the image to be transferred, leaving no white edges. Apply a slightly thick and even coat of mod podge image transfer on the right side of the image. Place the medium side down on the patter paper and remove any air bubbles or crease on the paper by running. a brayer over it. This now needs to dry overnight.

Step3: Next morning, I ran a wet brush over the top of the image, let the paper soak up the water and gently rubbed over the paper with my fingers. Slowly, the paper started peeling off revealing the transferred image. Be gentle, or the paper can tear. Once all the paper is out, let it dry and give it a coat of mod podge to seal and protect.
As you can see, the transferred image isn't as bright as the original, so I touched it up using watercolour pencils and watercolours. Now I have two page dividers ready to go into my planner.

I'd love to see how you've used this product and see your creation. Also, don't forget to check out our Birthday Celebration challenge - there are more than the usual share of prizes to be won


8 comments:

  1. Must do on my list now Kripa! Thanks for sharing the tutorial.

    ReplyDelete
    Replies
    1. :) its like magic. Would love to see what you make.

      Delete
  2. Thanks for sharing this beautiful tutorial in easy steps, beautiful creations!

    ReplyDelete
  3. Yes, this is a must try! Thanks Kripa. :)

    ReplyDelete
  4. Amazing technique and a wonderful tutorial ! Thanks Kripa :)

    ReplyDelete
  5. Thanks for the tutorial kripa ..the results are beautiful !!

    ReplyDelete
  6. wow.. sooper cool technique!! loved the tutorial and thank you for sharing it!!

    ReplyDelete

Thank you for your comments and feedback.